BPXZX - 846-1766, STABILIZER AND REPLENISHER, MX 14
- MSDS: BPXZX
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: 846-1766, STABILIZER AND REPLENISHER, MX 14
- National Stock Number: 6750-01-285-1770
Product Identification
Product ID:846-1766, STABILIZER AND REPLENISHER, MX 14
MSDS Date:05/05/1990
FSC:6750
NIIN:01-285-1770
MSDS Number: BPXZX
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 716-722-5151
Cage: 19139
Contractor
Telephone: 716-722-5151/(800) 242-2424
Cage: 19139
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 90-95% %
TRIETHANOLAMINE
CAS: 102-71-6
RTECS: KL9275000
Fraction By Weight: 1-5% %
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 1 - 5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
FORMALDEHYDE (SARA III)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: 0.9% %
OSHA PEL SEE 1910.1048
ACGIH TLV: C 0.3 PPM; A2; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
POLYMALEIC ACID
CAS: 26099-09-2
Fraction By Weight: <1% %
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE-EYE: VAPOR/LIQUID CAN CAUSE EYE
IRRITATION. SKIN: CAUSES IRRITATION. MAY CAUSE AN ALLERGIC
REACTION. INHALATION: MILD SENSORY IRRITATION OF EYES, NOSE &
THROAT. MAY CAUSE RESPIRATORY SENSITIZATI ON. INGESTION: MAY CAUSE
ABDOMINAL PAIN, VOMITING, DIARRHEA OR DIZZINESS. CHRONIC-NONE
SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:FORMALDEHYDE,A MINOR COMPONENT OF THIS
PHOTOGRAPHIC FORMULATION,HAS BEEN IDENTIFIED AS A
CARCINOGEN/POTENTIAL CARCINOGEN
Effects of Overexposure:EYE/SKIN: IRRITATION. INHALATION: IRRITATES
EYES, NOSE, THROAT AT 2-5 PPM. MAY CAUSE RESPIRATORY SENSITIZATION
IN SOME INDIVIDUALS. INGESTION: MAY CAUSE ABDOMINAL PAIN WITH
VOMITING, NAUSEA, DIARRHEA OR DIZZINESS.
Medical Cond Aggravated by Exposure:MAY AGGRAVATE PRE-EXISTING
ASTHMATIC CONDITIONS.
First Aid
First Aid:GET MEDICAL ATTENTION. EYE: IMMEDIATELY FLUSH W/WATER 15 MIN,
HOLD LIDS OPEN. SKIN: FLUSH WITH PLENTY OF WATER WHILE REMOVING
CONTAMINATED CLOTHING & SHOES. INHALATION: REMOVE TO FRESH AIR.
TREAT SYMP TOMATICALLY. INGESTION: DO NOT INDUCE VOMITING. IF
CONSCIOUS, IMMEDIATELY GIVE ONE GLASS OF WATER. NEVER GIVE ANYTHING
BY MOUTH TO AN UNCONSCIOUS PERSON.
Fire Fighting
Flash Point:NONE
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, CARBON DIOXIDE, ALCOHOL
FOAM
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:ABSORB IN VERMICULITE OR OTHER SUITABLE
ABSORBENT AND PLACE IN IMPERVIOUS CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED AND AWAY
FROM OXIDIZING AGENTS.
Other Precautions:THIS FORMULATION HAS A LOW BIOLOGICAL OXYGEN DEMAND.
WHEN DILUTED WITH WATER TO A CONCENTRATION OF 30 MG/L, OR LESS, IS
NOT EXPECTED TO CAUSE AN ADVERSE ENVIRONMENTAL EFFECT.
Exposure Controls
Respiratory Protection:A FULL FACEPIECE WITH CARTRIDGES OR CANISTERS
SPECIALLY APPROVED BY NIOSH FOR PROTECTION AGAINST FORMALDEHYDE OR
A TYPE C SUPPLIED AIR RESPIRATOR SHOULD BE WORN IF NEEDED.
Ventilation:LOCAL EXHAUST
Protective Gloves:NITRILE OR NEOPRENE
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS OR GOGGLES
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:USE OF A NON-ALKALINE (ACID) TYPE OF SKIN
CLEANER AND GLOVES WILL HELP MINIMIZE THE POSSIBILITY OF ALLERGIC
REACTION.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:B3
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:18
Vapor Density:0.6
Spec Gravity:1.01
pH:9.47
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, PALE YELLOW SOLUTION, SLIGHT FORMALDEHYDE
ODOR
Percent Volatiles by Volume:95(WT)
Stability
Stability Indicator/Materials to Avoid:YES
NONE WITH COMMON MATERIALS AND CONTAMINANTS WITH WHICH THE MATERIAL MAY
REASONABLY COME INTO CONTACT.
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE BY INCINERATION OR CONTRACT WITH A
LICENSED CHEMICAL WASTE DISPOSAL AGENCY.DISPOSAL,DISCHARGE OR
TREATMENT MAY BE SUBJECT TO FEDERAL,STATE,LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.